Pram Electech

Pump Testing Panel
Pump Testing PanelPump Testing PanelPump Testing PanelPump Testing PanelPump Testing PanelPump Testing Panel

PRIMARY CURRENT INJECTION TESTSET-6000A

 

 

TECHNICAL FEATURES :

 

Input                : 415 Volts, 3 phase, 50Hz, AC

Output             : 0 - 6000A at 1.5 Volts (Open Circuit Voltage)

Variable. All three phases will have individual current control.

 

Duty cycle        : 100%.

 

Tolerance          :+5%.

 

Over Current Relay based over current tripping will be provided such that the current output will trip when output current is beyond limit.

 

CONTROL & MEASUREMENT SECTION WILL BE PROVIDED WITH…..

 

1.     Power mains ON – OFF operation is done by means of an MCB along with ‘MAINS ON’ lamp indication.

2.     2A RYBN Control MCB With LED Indication

3.      Test ON – Test OFF push button along with ‘Test ON’ lamp indication.

4.      Contactor ON/OFF Push buttons

5.     Continuously variable voltage providing smooth control to maximum rated injection current in the last and variable step.

6.     Digital Ammeters connected in the secondary circuit of the measuring current Transformer, giving reading of loading current from 0-6000Amps with a resolution of 1Amps.

7.      A digital multifunction meter will be provided for input current measurement.

8.      A digital 8 channel temperature scanner with sensors will be provided to measure temp at 8 sensor points.

9.      Automatic tripping mechanism for protecting the loading transformer against over loading.

LOADING TRANSFORMER / DIMMER SECTION :

 

1.      This section will have 3 nos of double wound air cooled type loading transformer with secondary winding in each phase. Outputs of all the three phases

2.      The unit will have current transformer & its Secondary terminals.

3.      The Unit will have Heavy current output terminals

4.     THE unit will have three independent and motor operated dimmer stats to control the output current of each phase.

HOUSING

 

The whole system will be housed within sheet (Framing 1.6MM & All Door 1.6mm) metal cabinet/panel, treated properly and powder coated.

Size:- Control Panel with Transformer :- 1500 X 600 X 1300 MM (+/- 30%)

ACCESSORIES:

 

1.      Output Cables – Can arrange by the user.

2.      Power Input cable 3 Mtrs.

Additional Information:

• Delivery Time: Custom, as required
• Packaging Details: Seaworthy Wooden Packing on pallet

Useful for No Load Test (OC), Load Loss Test (SC) (Other Test on request).

A Single Measurement and control center.

Electrically interlocked and safe operation. (Over Voltage & Over Current Protection)

Motorized control or Hand Operated of output power for easy operation.

Rotary selector switch to select test for easy operation.

Indication Lamps for R, Y, B, Test On, Emergency.

Push buttons of Test ON / OFF and Motorized for easy operation.

Emergency Stop Switch with indication to avoid serious accident.

Zero Interlock Facility.

All Electrical Solutions under one roof.

 They are crucial for maintaining the reliability and safety of electrical systems. Here's a more detailed look at what they do and why they matter: 

TEST MOTOR PERFORMANCE CALCULATIONS-
1. Stator Winding Temperature Rise by resistance method
2. Dynamometer Torque Correction
3. Core Loss / Friction & Windage Loss/ Stray Loss
3. Correlation Coefficient γ (Gama)
4. Efficiency Calculations at different Load Points 

Transformer turns ratio is the ratio of the number of turns in the high voltage winding to that in the

low voltage winding.

 

Accurate Measurements of 1 Phase and 3 Phase Transformer / CT & PT  Turns Ratio.

Turns Ratio Range : 1 to 500, 5 digit resolution (for transformers / CT & PT testing).

Excitation Voltage & Current Range : 60 V AC, 250mA @ 50Hz (Other Range Available on Request)  (Input: 230V @ 50Hz).

Switch for Test ON/OFF, Hold, Parameters-1 & Parameters-2.

Inbuilt Over Current Protection for Shorten Winding

Test ON, Polarity Reverse & Measurement Hold Indication.

16 X 2 Jumbo LCD for viewing Parameters easily.

Parameter to be Measured : Tr (Turns Ratio), mA (Excitation Current), HV (Applied Voltage in HV Side, LV (Measured Voltage in LV Side).

Accuracy : ± 0.2% reading ± 0.1% range..

Accessories : Test Lead with Crocodile Clamp, Mains Cord, Instruction Manual.

Compliance to ANSI/IEEE C57.12.90 and IEC 600076.1 (2000) & Other Standards.

 

Additional Information:

• Item Code: TTRM-2000
• Production Capacity: 100 per Month
• Delivery Time: 4 Week
• Packaging Details: corrugated box

A micro ohm meter is indeed a specialized device for measuring extremely low resistances. It's an essential tool when accuracy is paramount in applications where even tiny amounts of resistance can make a big difference. 

Our Company is actively devoted towards offering a huge Range of Secondary Current Injection Test Set. Our provided Current Injection Test Set is developed from the modern technology & best quality of material. Clients can avail this Current Injection Test Set from us at affordable prices in a given time frame. This Current Injection Test Set is thoroughly tested on different quality parameters by our quality analysts for delivering a defect free range.

Additional Information:

• Packaging Details: Seaworthy Wooden Packing on pallet